|
|
|
Click on the
product links below to download a
detailed Product Data Sheet or a Material Safety Data Sheet.
|
|
Intumex®
AN (Firestop Acrylic - white color)
Intumex® AN is an acrylic based,
single component smoke and fire stop sealant.
It is designed for use in areas without movement & can be over painted with
water based paints without additional preparation. Applicable to electric cables, metal pipes, joints and
sealing gaps
against spread of smoke and fire.
Test Certificate / Approval
> EN 1366-4 (joints)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> BS 476 Part 20 and 22
|
|
|
|
| |
|
|
|
Click for Technical Data
|
Click for MSDS
|
|
|
Intumex®
S (Silicone Sealant)
Intumex® S is a silicone based elastic
single component,
slow combustion sealant for sealing
around doors and glazing etc
to protect against
the spread of smoke and fire. It is non friable, non ageing,
weatherproof and also non sensitive to most chemicals. Intumex® S was developed for use with any
type of penetration or
movement joints. It is also suitable for external use.
Test Certificate / Approval
> EN 1366-3 (cable/cable
bundles, pipes)
> EN 1366-4 (joints)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> BS 476 Part 20
> ASTM/UL
|
|
|
 |
|
|
| |
|
|
Top...
|
Click for Technical Data
|
Click for MSDS
|
|
|
Intumex®
MG
(High Pressure Sealant -
grey colour)
Intumex® MG is an acrylic based highly intumescent,
single component fire stopping sealant. On exposure to heat, it expands,
creating a high pressure seal designed for sealing combustible pipes up to 50mm
in diameter. Intumex®
MG can also be used on electrical and telecommunication cables, metal pipes, in joints
and gaps to prevent the spread of smoke and fire.
Test Certificate / Approval
> EN 1366-3 (cable/cable
bundles, pipes)
> EN 1366-4 (joints)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> ASTM/UL
|
|
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
Click for MSDS
|
|
|
Intumex®
AS (Trowable Sealant)
Intumex® AS is an elastomeric, single component trowable
grade fire stopping sealant for use on services in walls and floors.
It is designed for use with electrical and telecommunications cables,
non combustible pipes
and sealing joints and gaps against the spread of smoke and fire.
When fully cured, Intumex® AS provides an elastic, flexible seal that can
accommodate movement up to 60% of its height/width.
Intumex® AS is also resistant to moisture.
Test Certificate / Approval
> EN 1366-3 (cable/cable
bundles, pipes)
> EN 1366-4 (joints)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> ASTM/UL
|
|
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
Click for MSDS
|
|
|
Intumex®
MA (Firestop Mastic)
Intumex® MA is an intumescent, elastomeric,
one component mastic use
to prevent the spread of fire, smoke, hot and cold gases.
Once cured, Intumex® MA creates an elastic, flexible seal designed
for use in areas susceptible to vibration and movement.
Applicable to electrical cables, metal pipes, joints and gaps.
Test Certificate / Approval
> EN 1366-3 (cable/cable
bundles, pipes)
> EN 1366-4 (joints)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
|
|
|
| |
|
|
|
Click for Technical Data
|
Click for MSDS
|
|
|
Intumex®
AB (Fire Stopping
Coating - white)
Intumex® AB is a water based endothermic (non-expanding) fire stopping coating for use on services in walls and floors.
It is designed for use with cables, non combustible and combustible
pipes and joints without movement, providing a seal against the spread of smoke and fire. Intumex® AB is available in liquid and paste form to suit
application requirements.
Test Certificate / Approval
> EN 1366-3
(cable/cable
bundles, pipes)
> EN 1366-4 (joints)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
|
|
Intumex®
CSP (Fire Stopping
Coating - white)
Intumex® CSP is a water-based intumescent (expanding)
fire stopping coating for use with services in walls and floors.
It is designed for use with cables, non combustible and combustible
pipes and joints without movement, thus creating a seal against the
spread of smoke and fire. Intumex® AB is available in liquid and paste
form to suit application requirements.
Test Certificate / Approval
> EN 1366-3 (cable/cable
bundles, pipes)
> EN 1366-4 (joints)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> BS 476 Part 20
|
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
Click for MSDS
|
|
|
Intumex®
SB (Bulkhead Coating -
beige color)
Intumex® SB
is an ablative coating used on high density (175kg/m3)
mineral wools in wall and floor applications.
Tested with various service penetrations to
provide up to 120
minutes fire resistance.
Test Certificate / Approval
> AS 1530: Part 4: 1997
> BS 476: Part 20: 1987
> Achieved Fire
Resistance Level of
-/120/120 on the
un-penetrated system.
|
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
Click for
MSDS
|
|
|
Intumex®
PS (Fire stop
Pillows)
Intumex® PS Fire
resistant pillows
are woven glass fibre
bags filled with
granular intumescent
material. They fit into wall and floor openings, providing a quick and safe fire seal.
Suitable for computer server and data centres.
Due to this system's flexibility, retrofitting of cables and pipes is easily accomplished.
Test Certificate / Approval
> EN 1366-3
(cable/cable
bundles, pipes)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> BS 476 Part 20
> ASTM/UL
|
|
|
|
|
|
| |
|
|
|
Click for Technical Data
|
Click for MSDS
|
|
|
Intumex®
FS (Firestop Foam)
Intumex® FS1 Fire Resistant Foam is a one-component,
pink coloured polyurethane fire retardant foam in a CFC-free aerosol can.
The foam is close-celled and thus impermeable to gas, flame and water.
Intumex® FS1 is particularly suitable for sealing gaps in walls and floors
where access is restricted.
Ideal for sealing
around door and
window frames.
Test Certificate / Approval
> EN 1366-3
(cable/cable
bundles, pipes)
> EN1366-4 (joints)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
Click for MSDS
|
|
|
Intumex®
FP (Foam Plug)
Intumex® FP
is a permanently elastic
intumescent fire
stopping seal shaped as a circular wall plug. Intumex®
FP is for use in walls and floors and is designed
for use with single or bundles of cables,
and also with combustible
or non combustible pipes to seal against the spread of smoke and fire.
Test Certificate / Approval
> EN 1366-3 (cable/cable
bundles, pipes)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
|
|
Intumex®
FB (Foam Brick)
Intumex® FB is a permanently elastic
intumescent fire stopping brick for use in walls and floors.
Designed in the shape of a brick for quick and easy layering in walls and floors.
It can be used with single or bundles of cables
and also with
combustible and non combustible pipes to provide an effective seal against smoke and fire spread.
Test Certificate / Approval
> EN 1366-3 (cable/cable
bundles, non combustible
pipes)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
Click for
Application
|
|
|
Intumex®
IBS (Flexible Foam
Strip)
Intumex® IBS is fire protection is a flexible strip,
ideal for use in
movement joints and gaps with fire
resistance requirements.
It is a substitute for
non fire resistant sealant and it has been tested for integrity only
performance.
Test Certificate / Approval
> AS 1530: Part 4
|
|
|
| |
|
|
Top...
|
Click for Technical Data
|
Click for
Application
|
|
|
Intumex®
RS10 (Collars)
Intumex® RS10 is a fixed size fire stopping collar for plastic pipes.
It is made of intumescent wrap strips encased in an outer casing of powder coated stainless steel.
Intumex® RS10 is suitable for use on combustible pipes in walls and floors and can accommodate
pipes of 32mm to 315mm diameter.
Also tested for use
with single and
bunched cables.
Test Certificate / Approval
> EN 1366-3
(cable/cable
bundles, pipes)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> DIBT Z-19.17-1747
> BS 476 Part 20
> ASTM/UL
|
|
|
|
|
|
| |
|
|
|
Click for Technical Data
|
|
|
Intumex®
Fire Cement
Intumex® Fire Cement is a light weight, white coloured fire resistant cement
with a quick setting time. It does not shrink regardless of temperature change.
Intumex® Fire Cement is suitable for use in walls and floors with non combustible
pipes and steel cable ladders and trays etc.
Tested
> Achieved four
hour fire resistance
including insulation
performance.
|
|
|
| |
|
|
|
Click for Technical Data
|
Click for
MSDS |
|
|
Intumex®
UC (UniCollar®)
Intumex® UC is the latest generation of fire collar
designed to protect
combustible pipes
which pass through
fire resistant walls and floors. The system uses
continuous intumescent strip technology encased in a stainless steel outer skin and
achieves a fire
resistance of up to
four hours. Intumex® UC adopts a "One Size Fits All" concept
thus achieving lower cost inventories.
Tested
> EN 1366-3
(cable/cable
bundles, pipes)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> ASTM/UL
|
|
|
|
|
| |
|
|
|
Click for Technical Data
|
Click for
MSDS |
|
.jpg)
|
Intumex®
SE (Expansion
Joint Strip)
Intumex®
SE is a compressible
but flexible fire
resistant seal used
to seal movement joints in
the structure of a building. It consists of layers of Grafitex intumescent material bonded to special foam. Intumex®
SE can provide a
fire resistance of
up to four hours.
Tested
> AS 1530: Part 4
> AS 4072: Part 1
> BS 476: Part 20
|
|
|
|
| |
|
|
|
Click for Technical Data
|
Click for
Application |
|
|
Intumex®
V - (Firestop
Mortar)
Intumex® V is a hard setting, vermiculite based one component fire stopping mortar.
Due to its vermiculite additives, it provides excellent thermal insulation.
Intumex® V is designed for use with electrical, telecommunication cables and non-combustible and
combustible pipes. Intumex® V is weatherproof and can be used externally.
Tested
> EN 1366-3
(cable/cable
bundles, pipes)
> ÖNORM B 3807 (EN
13501-2/classification
reports)
> ASTM/UL
|
|
|
|
|
| |
|
|
|
Click for Technical Data
|
Click for
MSDS |
|
.jpg)
.jpg)
